Products

We carry many fire safety products in stock and will gladly place custom orders
ABC Fire Extinguishers

ABC Multi-Purpose Stored Pressure Dry Chemical Extinguishers

ABC or Multi-Purpose extinguishers utilize a specially fluidized and siliconized mono ammonium phosphate dry chemical. It chemically insulates Class A fires by melting at approximately 350°F and coats surface to which it is applied. It smothers and breaks the chain reaction of Class B fires and will not conduct electricity back to the operator.

Carbon Dioxide CO2 Fire Extinguishers

Carbon Dioxide Stored Pressure Extinguishers

CARBON DIOXIDE is discharged as a white cloud of "snow" which smothers a fire by eliminating oxygen. It is effective for Class B flammable liquids and is electrically non-conductive. Carbon Dioxide is a clean, non-contaminating, odorless gas.

Class D Fire Extinguishers

Class D Stored Pressure Dry Powder Extinguisher

The Amerex "soft flow" extension applicator is particularly suited for fighting Class D fires. It keeps the operator's hands away from the extreme heat and prevents inhalation of toxic fumes caused by burning material. The easily controlled, even discharge provides a non-dispersing application of the agent. The applicator may be quickly detached to provide a straight stream of chemical where greater range, a narrow discharge pattern or a lobbing effect is required.

MODEL B570 contains a special blended Sodium Chloride based dry powder extinguishing agent. Heat from the fire causes it to cake and form a crust excluding air and dissipating heat from burning metal. Metal fires involving magnesium, sodium, potassium and sodium-potassium alloys can be successfully extinguished with this extinguisher. There is data showing that zirconium, uranium, titanium, and powdered aluminum fires can be controlled and extinguished with this unique extinguisher.

Extinguishing Capacity Available in 150 lb. Wheeled or Stationary Magnesium Chips: 4 ft2 and/or 6 lbs. of metal Sodium or Potassium Spill: 5 ft2 and/or 5 lbs.of metalSodium or Potassium Spill Depth Over 1/2": 3 ft2 and or 6 lbs. of metal.

Sodium Potassium Alloy Spil: 3 ft2 and/or 2 lbs. of metal.

MODEL B571 contains a copper extinguishing agent specially developed by the U.S. Navy for fighting lithium and lithium alloy fires. The copper compound smothers the fire and provides an excellent heat sink for dissipating heat. Copper powder has been found to be superior to all other known fire extinguishing agents for lithium.

Extinguishing Capacity Available in 250 lb. Wheeled 4 ft 2 and/or 5 lbs. of lithium

Halotron Fire Extinguishers

Halotron I "Clean Agent" Extinguishers

Halotron I clean fire extinguishing agent discharges as a rapidly evaporating liquid, which is non-conductive, non-corrosive, and leaves behind no residue. Halotron I is the clean agent market leader with a history of successful real-world protection of valuable assets. From model scale aircraft to wide body commercial aircraft, from data centers to pharmaceutical and other industrial plants, the Halotro I agent has been used to extinguish the fire, limit damage and help reduce downtime that can be caused by other agents. The Halotron I clean agent has been determined to be the most environmentally beneficial halocarbon agent on the market today that meets wide performance standards. The primary raw material in the agent is HCFC-123, which has an outstanding profile of near-zero ozone depleting potential (0.0098, CFC-11=1.0) and a low global warming potential (77, 100 yr. CO2 time horizon). State of the art atmospheric modeling completed in 2009 describes the smaller environmental footprint than HFC-based agents available for portable extinguishers.Ideal applications for these extinguishers include: data centers, laboratories, manufacturing plants, general office areas, computer rooms, telecommunication facilities, clean rooms, control rooms, warehouses, military electronics, vehicles including classic autos, boats, engine compartments, aircraft ramps, onboard aircraft and in facilities that service aircraft and any facility where dry chemical extinguishers could cause unacceptable damage or contamination.

Wet Chemical Fire Extinguishers

Wet Chemical Stored Pressure Class "K" Kitchen Extinguishers

WET CHEMICAL extinguishers are the best restaurant kitchen appliance hand portable fire extinguishers you can purchase. Each model has been tested and approved for the Class K listing by UL specifically for restaurant kitchen hazards. They contain a special potassium acetate based agent. The recent trend to more efficient cooking appliances and use of vegetable based cooking oils dictates the use of a hand portable fire extinguisher with greater fire fighting capacity and cooling effect to combat these very hot and difficult fires. Available in two sizes - 6 liter or 2 1/2 gal. - with attractive stainless steel cylinders and easy to use hose and spray application nozzle. The superior fire fighting capability of the Wet Chemical agent is placed exactly where you aim it with no chemical residue to clean up. The Models B260 and B262 are the ideal "KITCHEN USE" fire extinguishers. They supplement existing cooking equipment automatic system protection for an extra margin of safety.

Water Mist Fire Extinguishers

Water Mist - MRI Compatible

WATER MIST is the ultimate extinguisher for Class A fires and where a potential Class C (electrical) hazard exists. The fine spray from the unique misting nozzle provides safety from electrical shock, greatly enhances the cooling and soaking characteristics of the agent and reduces scattering of burning materials. The Amerex Water Mist extinguishers contain de-ionized water (sold separately) making them the best extinguishers for protection of hospital environments, valuable books and documents, telecommunication facilities and "clean room" manufacturing facilities. The Amerex WaterMist extinguishers are easy to use, maintain, and service.

Fire Extinguisher Brackets

Brackets

All Amerex brackets are quality manufactured of steel with a primed and powder coated paint finish. The paint finish assures many years of use and meets the latest U/L salt spray requirements (240 hrs. @ 20% salt solution – ASTM B117).

Fire Extinguisher Cabinets

FireTech Fire Extinguisher Cabinets

FireTech FIRE EXTINGUISHER CABINETS work well indoors or out, thanks to their high-impact polystyrene construction and ultraviolet inhibitors that keep the color from fading, regardless of the weather or environment. Each cabinet includes an injection-molded frame, a scored break front, plastic cam lock with key, and a break-front striker. All FireTech parts are interchangeable with CATO Chief Cabinets.

Fire Safety Signs

Self-Adhesive Vinyl Fire Safety Signs

Self-Adhesive VINYL SIGNS are silk screened with UV inks, then clear laminated for durability and fade resistance. Mounting surface must be clean, dry, smooth, and non-porous. To mount these on a porous surface, such as brick or concrete block, use an aerosol adhesive.